|
|
|
|
|
|
EVOMS McLaren Catalyst Pipe Heat Blankets
|
|
|
EVOMS Catalyst Pipe Heat Defense Blankets
Our custom-made heat blankets are made in the USA from the highest grade Carbon/Kevlar materials to dramatically reduce exhaust heat radiated into the engine bay. Exhaust heat has a significant impact on the McLaren's intercoolers, which is positioned next to the exhaust and become quickly heat soaked due to their close proximity. Hot intercoolers are less effective at cooling the boosted air from the turbos, resulting in higher intake temperatures and less power. Our heat blankets reduce heat transfer from the catalyst pipes to the intercoolers and surrounding components, improving intercooler efficiency for more consistent power delivery. Our blankets will work on the OEM Catalyst pipes or any OE replacement aftermarket system. The net effect is Lower Temperatures = Higher & More Consistent Power.
**This is for the Catalyst Pipe blankets ONLY**
**Header Blankets sold separately**
Order part number: ENGMCCHB For the full set
|
|
|
|
|
|
|
|
|
|
EVOMS McLaren Heat Blanket SET
|
|
|
EVOMS Exhaust Header & Catalyst Pipe Heat Defense Blanket Set
Our custom-made heat blankets are made in the USA from the highest grade Carbon/Kevlar materials to dramatically reduce exhaust heat radiated into the engine bay. Exhaust heat has a significant impact on the McLaren's intercoolers, which is positioned next to the exhaust and become quickly heat soaked due to their close proximity. Hot intercoolers are less effective at cooling the boosted air from the turbos, resulting in higher intake temperatures and less power. Our heat blankets reduce heat transfer from the exhaust manifolds and catalyst pipes to the intercoolers and surrounding components, improving intercooler efficiency for more consistent power delivery. Our blankets will work on the OEM Catalyst pipes or any OE replacement aftermarket system. The exhaust manifold blankets are designed to allow the OEM heat shields to be installed over top of them, providing a double-layered heat defense. The net effect is Lower Temperatures = Higher & More Consistent Power.
|
|
|
|
|
|
|
|
|
|
Fabspeed Sport Racing Catbypass Pipes MP4-12C
|
|
|
- Fits all McLaren MP4-12C Vehicles 2012+
- Improves power +33HP/28 ft-lbs. of torque to the wheels (+39.6HP/33.6 ft-lbs. of torque to the crank).
- Fabspeed Catbypass Pipes (14.6 lbs. / 6.6 kg) save 10.5 lbs. / 4.7 kg from the OEM catalytic converter (25.1 lbs. / 11.4 kg).
- All McLaren MP4-12C vehicles have 4 restrictive catalytic converters. 2 catalytic converters on each engine exhaust bank.
- Fabspeed designed a set of catbypass pipes to replace the OEM catalytic converters for maximum power and dramatic sports car sound.
- Designed to bolt-on to any stock McLaren MP4-12C exhaust and works with the optional $5,000 McLaren sport/race exhaust or Fabspeed X-Pipe.
• Pricing subject to change without notice.
• This product may not comply with your local emissions standards. EVOMS is not responsible for emissions compliance, please purchase with care.
|
|
|
|
|
|
|
|
|
|
Fabspeed Supersport Catbypass Pipes 650S
|
|
|
Replaces the restrictive factory catalytic converters with much less restrictive straight-through pipes for maximum flow and performance
Product Details:
Replaces the restrictive factory catalytic converters with much less restrictive straight-through pipes for maximum flow and performance
Features:
Fits all McLaren 650S vehicles (2014+)
Increases horsepower and torque by 33 whp and 24 ft-lbs
Saves 10 lbs from the vehicle versus bulky factory catalytic converters
Fabspeed's Primary Catbypass Pipes replace the restrictive factory catalytic converters with much less restrictive straight-through pipes for maximum flow and performance.
Direct bolt-on replacement for the heavy factory catalytic converters
Adds an aggressive exhaust note for exotic high-performance sound
Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
Optional 02 spacers available to help prevent triggering the Check Engine Light
All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
NOTE: This product removes the catalytic converters from the vehicle, and as such, is recommended for track and off-road use only.
|
|
|
|
|
|
|
|
|
|
EVOMSit McLaren MP4-12C ECU Software Upgrade
|
|
|
The Evolution MotorSports Performance software for the McLaren MP4-12C is a simple yet effective way to improve the performance of a completely stock or slightly modified 3.8L biturbo 12C engine. Our rigorous testing, attention to details and stringent quality control ensures this upgrade is in a league of its own in terms of power and engine safety. Thoroughly tested on both the street and racetrack with both 91 and 93 octane pump fuels. The seamless integration of our software tuning enhances the overall power and drivability of this engine for uncompromised performance.
EVOMSit ECU Features include:
- Specifically programmed for stock exhaust / Standard OEM Catalysts
- Custom Stage 2 programming available for other engine hardware i.e. aftermarket exhaust, HFC, etc.
- Takes advantage of the untapped potential of the engine without excessive mechanical stress
- ~100 HP / ~90 TQ Gain in Midrange power – Software Only (Stock Exhaust Catalysts)
- Dyno Tested on 91 Octane Fuel. 93 Octane mapping yields slightly higher power gains
- All engine protection functions remain intact
- OBDII diagnostic capability is fully retained
- Tested on both 91 octane (95 RON) and 93 octane (98 RON) specific fuel
- Improved throttle response / overall drivability
- Enhanced Launch Control Functions
- Extensively tested, performance validated
- All tuning done in house – Same day turnaround
*Due to the architecture of this
Bosch MED17 password protected ECU, OBD port flashing is not an option. ECU’s
must be removed from the vehicle and flashed on the bench with our proprietary
password reader / flashing tools.
Email [email protected] or call +1.480.317.9911 for more information...
|
|
|
|
|
|
|
|
|
|
EVOMSit McLaren 650S ECU Software Upgrade
|
|
|
The Evolution MotorSports Performance software for the McLaren 650S is a simple yet effective way to improve the performance of a completely stock or slightly modified 3.8L biturbo 650S engine. Our rigorous testing, attention to details and stringent quality control ensures this upgrade is in a league of its own in terms of power and engine safety. Thoroughly tested on both the street and racetrack with both 91 and 93 octane pump fuels. The seamless integration of our software tuning enhances the overall power and drivability of this engine for uncompromised performance.
EVOMSit ECU Features include:
- Stage 1 software programmed for stock exhaust / standard OEM catalysts
- Stage 2 software programmed for aftermarket exhaust, high flow catalysts
- Takes advantage of the untapped potential of the engine without excessive mechanical stress
- Our development 650S saw an increase of over 10MPH in a standing 1/2 mile reaching a top speed of 169.53 MPH
- In a rolling 1/2 mile race, our tuned 650S beat a McLaren P1
- ~78 HP / ~76 TQ Gain in Midrange
- Dyno Tested on 91 Octane Fuel. 93 Octane mapping yields slightly higher power gains
- All engine protection functions remain intact
- OBDII diagnostic capability is fully retained
- Calibrations for both 91 octane (95 RON) and 93 octane (98 RON) specific fuel
- Improved throttle response / overall drivability
- Enhanced Launch Control Functions
- Extensively tested, performance validated
- All tuning done in house – Same day turnaround
*Due to the architecture of this Bosch MED17 password protected ECU, OBD port flashing is not an option. ECU’s must be removed from the vehicle and flashed on the bench with our proprietary password reader / flashing tools.
Email [email protected] or call +1.480.317.9911 for more information...
|
|
|
|
|
|
|
|
|
|
Fabspeed Supersport X-Pipe High Performance Exhaust MP4-12C
|
|
|
- Fits all McLaren MP4-12C Vehicles 2012+
- Improves power +6HP/12 ft-lbs. of torque to the wheels (when installed with Fabspeed’s Catbypass Pipes +7.2HP/14.4 ft-lbs. of torque to the crank).
- Direct replacement for the McLaren rear muffler or optional H-Pipe exhaust with pipes that go directly out of the rear of the car into the atmosphere.
- 14-16 gauge C.N.C. mandrel bent T304L stainless steel for improved sound and power.
- Much better sound and improvement over any stock McLaren exhaust including the optional $5000 McLaren Race exhaust.
• Pricing subject to change without notice.
• This product may not comply with your local emissions standards. EVOMS is not responsible for emissions compliance, please purchase with care.
|
|
|
|
|
|
|
|
|
|
Fabspeed Supersport X-Pipe High Performance Exhaust 650S
|
|
|
High-flowing X-Pipe replaces the heavy and restrictive factory exhaust system for maximum increase in performance and sound (pictured with optional Fabspeed OEM-Style Tips)
Product Details:
High-flowing X-Pipe replaces the heavy and restrictive factory exhaust system for maximum increase in performance and sound
Features:
- Fits all McLaren 650S vehicles (2014+)
- Increases horsepower and torque 6 whp and 12 ft-lbs
- Significant weight savings over versus the factory exhaust
- Includes Fabspeeds Deluxe Quad Style Tips or Fabspeeds OEM Style Tips
- V-band flange construction for perfect fitment with the factory components
- Fabricated from high-quality TIG-welded T304L stainless steel
- Direct replacement for factory heavy and restrictive muffler system
- All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
NOTE: Fabspeed Motorsport developed this exhaust system with direct Solidworks flow analysis in order to maximize the flow characteristics and performance qualities. The Fabspeed X-Pipe was designed to significantly outflow the $5000 factory optional race exhaust system. See video below for detailed analysis animations.
|
|
|
|
|
|
|
|
|
|
EVOMSit MP4-12C Intelligent Plug-and-Play Modules
|
|
|
EVOMSit is fanatically obsessed with achieving ultimate perfection with our performance engine software. Our analytical tuning methods combined with methodical testing procedures, state of the art equipment and unmatched mechanical intelligence are fused together to create the ULTIMATE aftermarket performance software.
Features: Evolution MotorSports Engine Performance
System for the McLaren MP4-12C improves upon the already impressive stock engine
horsepower and torque. The stock 3.8L
twin turbo engine with the latest V.10.2 (616 HP) Factory Update is transformed
to an impressive 659 HP and 501 lb. /ft. of TQ with our complete Stage 1 Performance
Computer Module. Stock Power as tested
on our AWD Mustang 500SE dyno was 616 HP and 443 lb. /ft. of TQ. Our engine performance
system enhances the turbochargers boost response time with our engine electronics
recalibration and increases boost pressure by 0.17 – 0.20 bar (2.5 -2.94 PSI).
Additional electronic mapping to the fuel injection system are also re-calibrated to compensate for the increased boost pressure and overall performance to
deliver a very potent yet safe power enhancement for to this one of a kind
supercar. - The electronic functions are carried
out with our EVOMSit Intelligent Control Module (ICM) which
integrates seamlessly into the OEM engine wiring harness with our plug and play
electronics connectors
- The EVOMSit ICM software is precisely calibrated to improve the turbocharger
boost pressure while delivering the exact amount of fuel which safely increases
the engines power and efficiency
- The EVOMSit ICM is 100% reversible
without leaving any traces it was ever installed
- The EVOMSit ICM does not interfere
with OEM diagnostics or dealer service
- The EVOMSit ICM does not disable any
of the OEM electronic engine safety features
- Our complete Stage 1 and Stage 2
Performance systems have been extensively tested and performance verified
during dyno simulation, real world road and race track driving conditions and
are calibrated for both 91 and 93 octane fuels
|
|
Stock MP4-12C
|
EVOMSit
Stage 1
|
EVOMSit
Stage 2
|
|
Max. Power Output HP
|
616 HP @ 7000 RPM’s
|
659 HP @ 7000 RPM’s
|
679 HP @ 6800 RPM’s
|
|
Max. Engine Torque TQ
|
443 lb-ft @ 3300 RPM’s
|
501 lb-ft @ 3450 RPM’s
|
522 lb-ft @ 3600 RPM’s
|
The
heart of the Evolution MotorSports engine performance System is the EVOMSit
Intelligent Engine Control Module (ICM). The ICM
integrates seamlessly to improve the power and torque of the twin turbocharged
McLaren 3.8L engine. Fitting the ICM is simply made through a “plug and play”
wire harness with OEM connection for a trouble-free installation. Our dual
processor, 4-channel ICM is programmed to safely increase the turbocharger
boost pressure by an additional 0.27 –
0.30 bar (3.96 -4.41 PSI). The fuel calibration is also controlled
through the ICM which is programmed to electronically increase fuel pressure
with the increase in boost pressure. The
ICM boost and fuel parameters have been optimized for both 91 and 93 octane and
have been extensively tested on both our AWD dyno as well as in real world
street and race conditions. Our test
MP4-12C has just returned from a 1000 mile street and race rally where the
vehicle was pushed to its limits for over 800 of the 1000 mile event.
|
|
|
|
|
|
|
|
|
|
Fabspeed Sport Racing Catalytic Converters MP4-12C
|
|
|
- Fits all McLaren MP4-12C Vehicles 2012+
- Improves power +6HP/12 ft-lbs. of torque to the wheels (when installed with Fabspeed’s Catbypass Pipes +7.2HP/14.4 ft-lbs. of torque to the crank).
- Direct replacement for the McLaren rear muffler or optional H-Pipe exhaust with pipes that go directly out of the rear of the car into the atmosphere.
- 14-16 gauge C.N.C. mandrel bent T304L stainless steel for improved sound and power.
- Much better sound and improvement over any stock McLaren exhaust including the optional $5000 McLaren Race exhaust.
• Pricing subject to change without notice.
• This product may not comply with your local emissions standards. EVOMS is not responsible for emissions compliance, please purchase with care.
|
|
|
|
